How do I remove Pledge Hardwood Floor Cleaner from a pre-finished hardwood floor?

Flooring is sealed Armstrong Bruce in Spice color. This product has left a dull film on the flooring. A Pledge rep recommended mixing 1 cup of ammonia...


Flooring is sealed Armstrong Bruce in Spice color. This product has left a dull film on the flooring. A Pledge rep recommended mixing 1 cup of ammonia with a 1/4 cup of any non-chlorine cleaner in a half gallon of cool water. Mop on and scrub with a clean sponge mop and let soak for about a minute. Then dry with a soft cloth. This sounds ok. Just looking for a second opinion or approval of this method. Thanks.

Try testing some spic and span in some water on a small spot. My sister removed wax from some hard tile with this.

powered by Yahoo Answers

Technorati Tags: , , , , , , , , , , , , , , , , , , ,

3 Responses to “How do I remove Pledge Hardwood Floor Cleaner from a pre-finished hardwood floor?”

  1. Fate543 says:

    Ya that sounds like it would be fine to do. I would also call Armstrong's customer service number:
    1-800-233-3823
    Monday-Friday
    9:00 am – 4:30 pm ET

    I would also recommend this site because who knows how long that will take right? Maybe you'll find some tips here

    http://www.findanyfloor.com/hardwood/HardwoodFlooringCare.xhtml

    And lastly (ill stop after this!!! )

    Here is an online store you can buy EVERY cleaning product from: even went you contact armstrong you can go here and find their products:(cheaper too)

    http://www.findanyfloor.com/OnlineFloorStores/1877FloorGuy.xhtml
    References :

  2. jean ann j says:

    Try testing some spic and span in some water on a small spot. My sister removed wax from some hard tile with this.
    References :

  3. Jenny C says:

    Hi, I damp mop only when it looks like it needs it with only a slightly damp mop rinsing the mop regularly. I just use warm water as we like going barefoot and I like natural products. Do not use ammonia based or oil based soaps as they dull the finish of your floor. Once in a while I use a 1/4 cup vinegar to 1 gallon water. I attach a towel to my swifter and quickly dry mop it if it is cold out and it is not drying quickly.
    http://www.hardwoodlaminateflooringguide.com/cleaning-hardwood-floors.html
    References :

Leave a Reply